Can You Change Eyelets on Boots? (Reasons Why To Do So)

You bought your new boots, and you love them, but the eyelets are made of cheap metal. You can’t get the laces through the holes because they are too small. What can you do?

"As an Associate of Amazon I earn from qualifying purchases made from links in this post."

A boots eyelet is a metal or plastic piece that holds the laces in place on your shoe. The eyelet is a hole through which the lace is threaded, creating the sturdy hold that keeps your foot securely in place.

Stray lace ends are a common problem for boots. When you have long laces, you need to make sure that they are tied correctly, especially when you’re wearing them with tall boots and long skirts.

If the laces become frayed, or if they come apart easily it’s time to replace them. If they are just a little bit wore out but still strong and correctable, you can change your eyelets to new ones. It’s not an especially complicated task and doesn’t cost too much money if you know what you’re doing.

Can You Change Eyelets on Boots?

Yes. In fact, when your boots are worn and have bad eyelets, it’s a good idea to change them as it helps minimize the risk of discomfort, injury, etc.

When it comes to changing eyelets on boots, you can simply take your boots to a cobbler and they will change eyelets fairly quickly and cheaply.

Alternatively, you can change eyelets on boots yourself as well. Changing eyelets on boots is a simple procedure providing you have the necessary tools and know-how.

When your boots are new, you shouldn’t have any problem changing their eyelets as they are very easy to remove. However, when your boots start to wear out, this process becomes much harder as the eyelets get smaller and smaller and there isn’t enough place to fit the pliers inside them.

In addition, you have to be very careful while working with such small components because they can break easily.

Therefore, if you decide to change your boot’s eyelets by yourself, you need a strong pair of pliers with a special jaw for eyelets (those which look like pincers). You also need patience because this process might take some time.

What is the Purpose of Eyelets in Boots?

Eyelets are holes punched into the upper side of the boots to allow you to thread shoelaces through them. Eyelets are generally reinforced with a plastic or metal grommet to prevent fraying as well as offer a smooth surface through which shoelaces are fed.

The main purpose of eyelets is to keep the boots tightened and fit your feet.

Eyelets are mainly found in men’s dress and casual footwear such as work boots and cowboy boots, but women’s shoes like cowboy boots can have eyelets as well. As stated above, eyelets are used for tying the boot together with laces but they can also be used to secure the boot tightly and avoid slippage.

There are several different types of eyelets in boots and they all perform the same basic function, i.e. holding the boots in place so that you can tighten them according to your preferences. However, it is important to know that each type of eyelet has its own set of pros and cons.

Why Do Boots Have Hook Eyelets?

Some boots have hook eyelets on their upper part. They feature a hook-shaped design and are made of metal hooks. There are many reasons why some boots have hook eyelets with the primary reason being that they make lacing quick and hassle-free.

With regular eyelets, you have to thread each lace carefully through each one. On the other hand, hook eyelets allow you to simply wrap the laces around each hook.

Hook eyelets are particularly useful for tall boots that require a little more dexterity and time to slip into and out of. Hook eyelets are also used to waterproof a boot.

Regular eyelets leave gaping holes between them and the lace through which water can easily enter. Hook eyelets don’t have any obvious holes to let water through, hence they improve the waterproofing properties of a boot. Last but not least, boot manufacturers use hook eyelets to add sand resistance.

What is the Top Eyelet on Boots for?

Boot manufacturers strive to give customers ways to modify the way their boots are laced. Most boots have a standard crisscross pattern and there are other additional features to facilitate any modification to standard lacing.

The top eyelet on boots is one such feature. It’s there for a number of reasons. Its primary purpose is to make the boots fit better.

With the method of lace locking, you can increase the tension that the top lace applies against your foot’s instep and make sure that the sole stays in its proper place.

Reasons Why You Might Want to Remove the Eyelets

There could be a number of reasons why you might want to remove and replace the eyelets. The primary reason is that wearing boots with bad lacing loops or eyelets can lead to serious discomfort and even injury over time. This issue is more prominent with tall boots or high-top boots that provide ankle support.

Bad eyelets make the ankle support of such boots less stable, which increases the risk of ankle sprain or injury. Another reason is the inconvenience. If it has become more of a hassle to keep your boots tightened when tied, then it may be a good idea to remove the eyelets as it’s a clear indication that they are worn.

If you continue wearing your boots without replacing them, the eyelets will peel away from boots or the surface of your boots will begin to crack around them.

How Do You Remove Old Eyelets?

The easiest way to do this is to visit a cobbler and have the eyelets removed and replaced. It doesn’t cost much and the solution is quick and hassle-free.

However, if you wish to do it yourself, then this is possible as well because removing old eyelets is not that difficult. You will need pliers and a flat head screwdriver.

The instructions are as follows:

  1. Put the thin edge of a flat head screwdriver under the eyelets so you can start prying up their metal edging. Shove the screwdriver edge beneath the eyelets’ circumference and slowly push up.
  2. Once the edging around their entire perimeter is opened up, carefully pull on the eyelets to remove them.
  3. You can use the screwdriver and the pliers to separate the two stubborn halves. Be sure to do this carefully as you don’t want to damage the material of the boot.
  4. Finally, put the new eyelets in place. They should snap together pretty easily.

How Do You Put Eyelets in Leather Boots?

Putting eyelets in leather boots is a straightforward task. You will need an eyelet kit. It includes a spreader, a base, and a punch. You won’t have to use the punch as boots already have holes where eyelets are installed.

Follow these instructions:

  1. Place the base from the eyelet kit on the work surface and then place the male eyelet on the base.
  2. Place the hole in the boot over the middle section of the eyelet and put the outside of your leather boot down so that you are working on its inside.
  3. Now slide the female portion of the eyelet on top of the leather boot, onto the center of the male eyelet.
  4. Place the spreader in the center of the eyelet and use the hammer to hit its back to seal the eyelet in place.
  5. Check the center of the eyelet to make sure that all the edges are properly spread and the eyelet is secured in your leather boot.

In summary, the answer to whether or not you can change eyelets on boots is yes, but only if you take the time to learn how to do it properly and to always start with new eyelets. Small holes that straddle the outer edge of the shoe can be difficult to fill, especially when the inside of the boot is curved inwards.

You may also be interested in… Can Steel Toe Boots Cause Numbness? (Why Is It So?) and Can You Use Sharpie on Shoes?